Ryobi’s 18V ONE+ line offers two exceptional finish nailers, the P325 and P326, that are equally suited for small DIY projects and professional tasks. While the P326 is only a few modifications away from the P325, there are some notable differences that may influence your choice between the two. In this article, we’ll explore the features that distinguish these two nailers.
Modes
One key difference between the P325 and P326 is their trigger modes. The P325 boasts both single-fire and bump-fire modes, while the P326 only has a single-fire mode. The absence of a bump-fire mode in the P326 is reasonable since it is marketed as a finish nailer that prioritizes precision work.
The P326’s single-fire mode is designed for controlled and accurate finishing tasks. However, the P325 earns extra points for versatility as it provides both modes. It can handle both precise finishing work with the single-fire mode and quick nailing and framing tasks with the bump-fire mode.
Price
You can check the price of the Ryobi P325 and P326 below.
Ryobi p325
Ryobi p326
In all honesty, we believe that the P326 is not a good choice considering it doesn’t have a bump-fire trigger. On the other hand, the P325 comes with both single-fire and bump-fire modes, and it only costs less than $20 more.
Given that the airstrike technology, magazine capacity, and efficiency are identical in both the P325 and P326, we recommend going with the P325.
Design
The latest Ryobi P326 does have a few design changes, but they are not significant enough to drastically improve the user experience.
However, one notable improvement is the slimmer tip of the P326, which improves precision and enables you to operate the nail gun accurately in tight and hard-to-reach spaces.
The P326 features a slight modification in the size of the air pressure adjustment at the back, and the depth gauge dial has also been tweaked a bit. However, these changes are merely cosmetic and do not affect the efficiency of the tool.
Weight
The Ryobi P325 has a weight of approximately 7.59 pounds, while the P326 weighs only around 7 pounds. Of course, the addition of batteries will increase the weight by a pound or half, but these nailers have a well-structured and balanced design, making them easy to work with.
While the P326 has a slight advantage in terms of weight, it doesn’t make the P325 any less impressive.
Shots per charge
The P325 can fire up to 800 shots per charge, while the P326 can deliver around 1000 shots per charge, depending on the battery capacity. These numbers are based on the 18-volt, 4-ah batteries.
It’s noteworthy that both nailers offer impressive battery life, which allows you to work for long hours without needing to recharge or replace the battery frequently, even during demanding work sessions.
Magazine Capacity
Both the P325 and P326 have a magazine capacity of 105 nails. These 16-gauge finish nailers can hold up to 100–105 nails at a time, which allows you to work for extended periods without constantly reloading the nailer.
Finish Nail Length
Both the Ryobi P325 and P326 are compatible with 16-gauge nails that range from ¾ to 2 ½ inches in length. This allows for a wide range of nailing options in various types of wood, including softwood, construction lumber, oak, and more.
Power Source
The Ryobi P325 and P326 are cordless nailers that use batteries as their power source. They are compatible with all lithium-ion batteries from the 18V ONE+ series. For longer work hours, a 4-Ah battery would be the best option to ensure maximum efficiency.
Read Also: Ryobi P237 vs P238: Which Impact Driver is Right for You?
Final Verdict
In terms of features and performance, the P325 clearly surpasses the P326 due to its availability of both single-fire and bump-fire trigger modes, despite being priced lower than the P326. Both nailers are user-friendly, offering tool-less nail loading, depth adjustments, and jam clearing, making them easy to use on the job. Ultimately, the choice between the two would be the P325.
